KEY FEATURES 2.4 GHz Wireless 5.6" TFT-LCD Monitor with Remote Control, On-Screen Menu Display, and Motion Detection & Night Vision Remote Control for LCD Monitor Friendly on-screen menu for adjustments of the alarm volume, contrast, brightness, color, tint, etc. Fresh new 5.6 inch color TFT-LCD display. Weatherproof camera for indoor or outdoor use. Automatically uses night vision technology in low light. Supports up to 3 cameras. Manual or auto switching among cameras, cycle time can be adjusted from 2 to 30 seconds. Monitor beeps when motion detected by camera, the beep volume can be adjusted. Camera`s motion detection feature can be armed or disarmed on individual camera (Cam1, Cam2 and/or Cam3). LCD screen can work in 3 modes: scan, auto or manual In scan mode, the monitor hibernates in standby to save battery, and the motion trigger or pressing any button can activate it. Both camera and monitor can work with AC adapter (included) or optional rechargeable battery pack. The monitor can be in portable use for 2 hours with the optional rechargeable battery pack. A/V Out port connects to VCR/DVR for recording - NTSC Only A/V In port available to connect to multiple wired cameras and other media sources for multiple purposes - NTSC Only Both camera and monitor are wall mountable INCLUDED ACCESSORIES Remote Control LCD AC adapter 110-220V Camera AC adapter 110V included (Buyer can request to replace it with 220V adapter) Wall Mounting Kit Multi-Purpose Cable OPTIONAL ACCESSORIES Optional Additional Camera: Model # HS-CA500 Optional Rechargeable Battery for the Camera: Model # HS-BP500 Optional Rechargeable Battery for the LCD Monitor: Model # HS-BP560 NOTE: LCD monitor, may get interference (static lines/noise) from other 2.4 GHz devices like wireless network adapters and routers, and wireless phones (only 2.4 GHz) that are in close proximity to the monitor