NYC Approved Window Guards For child safety, install John Sterling brand fixed windowguards for non-sleeping areas with double hung or single hung windows that are 15 inches to 19 inches high and 23 to 42 inches wide. These off white steel window guards are security window guards with three horizontal steel bars. New York City Approved #HDWG 05-87-86. Screws, window stops and instructions included. Safety experts agree with New York City officials: protect children from falls from windows. John Sterling window guards are provide both safety and home security, too. The New York City Department of Health approves these non-opening window guards for installation in non-sleeping rooms. Each year in the USA, over 15,000 children fall from open windows. Many die or suffer serious injuries from landing on concrete or other hard surfaces. NOTE: For sleeping area window guard installations in New York City, check with your local borough for code requirements. Childproofing windows with 1120 or1130 series John Sterling window guards is a must for multi-level homes or homes where windows are close to the floor. John Sterling window guards have solid steel bars to add security to any window. For baby and child safety, install window guards on any window more than 12 feet above ground level, windows 2nd through 6th story, or at any level where a child could fall or climb through an open window. Window screens are not strong enough to keep children safe from window falls. Check local city codes prior to help you select the proper type of window guards to protect your children. Non-Opening Window Guards.1120 Series. 4.5 inch spacing between the bars. These can be ordered in White or Black. These are secured with 2.5 inch #10 One Way Screws. To remove the guards, you must break off the screw head and drill out the screw. JS-1123-P 3 Bars 15" H X 23-42"W: Maximum Height Protected: 19" JS-1123-S 3 Bars 15" H X 14-24"W: Maximum Height Protected: 19" JS-1123-L